Coconut wax is a soft, creamy white candle wax made from hydrogenated coconut oil. It is used almost entirely for container candles, and nearly every product sold under the name is a blend. This guide explains what is in it, how it behaves, and how makers deal with its softness.
What coconut wax is made of
Coconut oil melts at about 76°F (24°C), so it is liquid in a warm room. Hydrogenation converts the oil's unsaturated fats to saturated ones, which raises the melt point and firms the oil into a wax. How far the oil is hydrogenated differs from one coconut wax to the next.
The cosmetic ingredient name (INCI) for the result is Hydrogenated Cocos Nucifera Oil, or hydrogenated coconut oil. That is the name on the specification for the coconut wax we sell.
Hydrogenation alone only goes so far. It takes coconut oil from a melt point of roughly 75°F to about 100°F (24 to 38°C). To go higher, the hydrogenated oil is blended with other vegetable waxes.
Why it is nearly always a blend
A wax that melts near 100°F will not hold its shape in a hot car or a sunny window. Manufacturers add harder materials to make a usable candle wax, and the choice of those materials is what separates one coconut wax from another.
Common blend partners include soy wax, apricot wax and beeswax. Some coconut waxes on the market also contain petroleum wax. A wax can be mostly coconut and still carry a small share of a petroleum derived ingredient. If you want to keep petroleum derived materials out of your candles, check the description before you buy.
Manufacturers rarely publish exact ratios. If the composition matters to you or your customers, ask for the data sheet and read the description closely. The Creamy Coconut Wax (CCN1 by Calwax) we stock is sold as a paraffin-free blend of coconut wax and other natural ingredients. The manufacturer does not disclose the full recipe, and we do not claim to know it.
Melt point and hardness
Coconut waxes sit at the low end of the candle wax range. CCN1 is listed at 108 to 115°F (42 to 46°C). Blends built with harder partners run higher. Coconut apricot waxes and firmer slab waxes fall between about 121 and 131°F (49 and 55°C), depending on the grade and the supplier.
The low melt point is also why the wax is soft. Expect coconut wax to arrive as a slab or soft chunks and to dent under a thumb at room temperature. It will not stand up as a pillar or taper.
Scent load
CCN1 will hold up to 10 percent scent by weight. That is the stated maximum for the wax. We scent with essential oils, and how to choose essential oils for candles covers that side of the recipe.
A maximum is a ceiling. Essential oils differ from one to the next, so start below it, test, and work up only if the scent needs it.
Pour temperatures
Pour temperature guidance differs from blend to blend, so use the figures for the specific wax you have.
- CCN1. The general recommendation is to pour at around 150°F (66°C). In our experience it usually works as a single pour, poured at 170 to 180°F (77 to 82°C) when the room is cool and 160 to 170°F (71 to 77°C) when the weather is hot.
- Coconut apricot blends. Pour at about 175°F (79°C), give or take 5°F.
Common problems
Soft or uneven tops
Coconut wax usually sets with a smooth top, but not every time. With CCN1, some pours need a pass with a heat gun or a thin second pour to level the surface. Tall, narrow jars are the most likely to sink through the center, and a cool work area can leave small holes in the surface.
Sweating in heat
Sweating is scent oil or low melting wax collecting as beads on the surface. Coconut candles are prone to it in warm conditions, and a summer outdoor market is enough to bring the beads out.
Makers usually trace it to one of a few things. The scent load is more than the wax can hold, the oil was not stirred in fully, the oil does not dissolve well in the wax, or the candle went through a quick temperature swing. To prevent it, stay within the stated maximum for your wax, stir the oil in thoroughly, let candles cool at room temperature, and store them somewhere cool with a steady temperature.
Softening in transit and storage
A wax that melts at 108 to 115°F can slump in a hot delivery truck. Keep finished candles out of direct sun and tell customers to do the same.
How makers harden coconut wax
If you work in a warm climate, the usual fix is to blend in a small share of a harder, higher melting wax. The options are below, and the right amount depends on the wax you start with.
- Beeswax. We have found that adding 1.5 ounces of beeswax per pound of CCN1 (about 9 percent of the wax weight) raises the melt point and makes a high quality candle. A coconut wax that is already fortified needs less.
- Stearic acid. For warm, tropical conditions the guidance for CCN1 is to add 15 percent palm stearic acid.
- Rice bran wax. A plant wax that melts at about 167 to 185°F (75 to 85°C), which makes it a strong hardener at low percentages and an option for vegan lines. See what is rice bran wax.
The gap between those figures reflects different starting waxes. A soft blend like CCN1 needs more help than a slab wax that is already fortified. Any hardener also changes how the candle burns, so retest your wick after each change. Our guide on how to harden coconut wax walks through the process.
Is coconut wax non-toxic?
The term needs a concrete basis. Coconut wax is hydrogenated coconut oil, a plant fat. CCN1 is sold as a blend that contains no paraffin. Those two facts describe the material.
What a finished candle emits is a separate question. Burning any wax with a wick and scent produces combustion products, and we have not found published emissions testing specific to coconut wax candles.
Where coconut wax fits
Choose coconut wax for container candles where you want a creamy look, good glass adhesion and a scent load up to 10 percent. Plan for its softness from the start, especially if you sell in summer or ship to hot regions.
For a step by step recipe, see how to make a coconut wax candle. To see how coconut compares with soy, beeswax, rice bran and palm, read candle wax types compared.