We scent candles with essential oils and nothing else. This guide explains that choice, then covers how to pick essential oils and other natural extracts that work in plant based wax. It is the one guide where we also explain fragrance oils.
What a fragrance oil is
A fragrance oil is a manufactured scent blend. It can contain synthetic aroma chemicals, natural extracts, solvents and stabilizers in any proportion. Synthetic aroma chemicals are built from petrochemicals or from plant derived starting materials such as the pinenes in turpentine, and a 2024 review in a chemistry journal describes the field as still moving away from a petrochemical economy. We found no peer-reviewed figure for the petroleum derived share, so we do not quote one.
The fragrance industry's trade association publishes a list of the ingredients its members use. The 2025 edition has 3,691 entries, of which 1,021 are natural materials such as essential oils and extracts. It does not show which entries are in a given blend, or how much.
The formula of a specific blend is normally not published. For cosmetics sold in the United States, the Food and Drug Administration lets the whole blend appear on the label as the single word "fragrance", because the labeling law cannot be used to force a company to reveal a trade secret. Candles are not cosmetics, and the federal candle requirements summarized by the Consumer Product Safety Commission include no ingredient list.
Researchers have measured what that leaves out. A 2011 study analyzed the vapors from 25 scented laundry, cleaning, personal care and air freshening products. It identified 133 different volatile compounds. Twenty-four of them are classified as toxic or hazardous under US federal laws, and every product gave off at least one. Only one of the 133 was named on any label. The study did not test candles, and it measured emissions and labels only. Its authors make no claim about the risk of using the products.
What "natural fragrance" tells you
A blend sold as a natural fragrance may well be made from plant materials. The label still does not say which ones. The labeling allowance above applies whatever the source, and the FDA notes that the law treats ingredients from plants the same as those from any other source.
So a natural fragrance has the same gap as any other blend. You are told the claimed origin of the ingredients, and you are not told the ingredients. Without the full composition, you are scenting a candle with something you cannot describe to your own customers.
What "phthalate free" means
Phthalates are a family of compounds developed as plasticizers. One of them, diethyl phthalate, has been used as a solvent and fixative in fragrances, and the FDA's surveys found it was the only phthalate still commonly used in cosmetics by 2010.
"Phthalate free" means the blend is made without phthalates. That is all it means. It says nothing about the aroma chemicals, the other solvents or the stabilizers in the blend, so it does not mean petroleum free, and it does not mean the formula has been disclosed.
It does not mean non-toxic either. The claim covers one family of ingredients and nothing else.
Why essential oils are easier to verify
An essential oil has a defined meaning. The international vocabulary standard for aromatic natural raw materials, ISO 9235, limits the term to a product obtained from a plant by steam distillation, by mechanical pressing of citrus peel, or by dry distillation. US law has no regulatory definition of the term, so the ISO meaning is the one to hold a supplier to.
Because an essential oil comes from a single named plant, its expected chemistry is known. ISO publishes standards for individual oils that give the expected range for each main component. A gas chromatography/mass spectrometry (GC/MS) report separates the volatile compounds in a sample and identifies each one, so a batch can be compared with that profile. Ask for the report for your batch. A distributor worth buying from will supply it.
This makes essential oils the most checkable way to scent a candle. A label alone proves nothing, and a GC/MS report has limits.
- Adulteration is common. In a 2021 study of 31 neroli, mandarin and bergamot oils, most of them bought online, more than 45 percent failed the ISO profile and more than 19 percent were diluted with solvents. Some contained synthetic odorants. The sample was small and not random.
- Standard GC/MS does not see everything. In a study of eight commercial vetiver oils, GC/MS could not detect dilution with vegetable oil, which nuclear magnetic resonance found. Researchers working on lavender oil note that a skilled blend with a cheaper oil can look nearly identical to the pure oil on conventional gas chromatography.
- A report describes the sample that was tested. It is only useful if it belongs to the batch you received.
Look for a report that carries the batch number printed on your bottle, the botanical name, the plant part, the extraction method, the country of origin and the name of the laboratory.
Types of natural aromatic extracts
The ISO vocabulary separates natural extracts by how they are made, and the method decides what ends up in the bottle.
| Type | How it is made | What it contains | In melted wax |
|---|---|---|---|
| Steam distilled essential oil | Steam or water distillation | Volatile aroma compounds only | Blends in. The standard choice. |
| Cold pressed essential oil | Pressing of citrus peel at ambient temperature | Volatile compounds plus a small non-volatile residue | Blends in. Highly volatile. |
| Absolute | Ethanol extraction of a concrete | The alcohol soluble part of the concrete | Not established. Test. |
| CO2 extract | Extraction with carbon dioxide under pressure | Aroma compounds, often with plant waxes or fats | Expected to blend. Test. |
| Resinoid | Solvent extraction of dry material such as a resin | Resinous and aroma compounds | Not established. Test. |
| Raw gum resin | Collected from the plant as it is | Resin, gum and some volatile oil | Not suitable as it is. |
Steam distilled essential oils
These contain only what travels with steam, which means the volatile aroma compounds. Those compounds are oily and do not dissolve in water. Plant based candle waxes such as coconut wax are hydrogenated fats, and aroma compounds dissolve in fat. We know of no published study of essential oil solubility in candle wax specifically, so the limit for a given wax is something to test, starting from the wax maker's stated maximum.
Cold pressed citrus oils
Cold pressed oils are pressed from the peel without heat, so they carry things that distillation leaves behind. A 2026 review puts citrus oils at 85 to 99 percent volatile compounds, with the remainder made of waxes, fatty acids, pigments, coumarins and related compounds. These oils are among the most volatile on the shelf.
Absolutes and concretes
Some plant materials, flowers especially, are extracted with a solvent. The first product is a concrete, which holds the aroma compounds along with plant waxes. Washing the concrete with ethanol, chilling and filtering out the waxes, then distilling off the ethanol gives an absolute.
An absolute is by definition the alcohol soluble fraction, and we found no authoritative source on how absolutes behave in melted plant wax. Test a small batch for sediment or clouding before you buy in quantity. The ISO definition also says the solvents are totally or partly removed, so trace solvent can remain. Ask the supplier which solvent was used and what the residual level is.
CO2 extracts
Carbon dioxide becomes a supercritical fluid above about 88°F (31°C) and 7.3 MPa (roughly 1,060 psi). In that state it works as a solvent, and it returns to gas when the pressure is released. A review of the method describes it as residue free and gentle on heat sensitive compounds.
A CO2 extract is a different material from the distilled oil of the same plant. The proportions of aroma compounds differ, and carbon dioxide also pulls out plant waxes and, at higher pressures, fats. Ask what a given extract contains, since heavier ones can be thick or waxy. The compounds involved are fat soluble, which makes these extracts good candidates for wax. Test each one.
Resins, gums and resinoids
Frankincense (olibanum) and myrrh are gum oleoresins. The ISO vocabulary describes them as mostly resinous compounds and gum, with some volatile oil. Gum is made of polysaccharides, which do not dissolve in fats, so raw resin will not melt cleanly into wax.
There are two ways to use them. The first is the essential oil distilled from the resin, which behaves like any other essential oil. The second is a resinoid, a solvent extract of the dry resin. Resinoids are often sold diluted, and their solubility in wax is not documented in any source we trust. Test them, and check what they are diluted in.
Dilutions
Costly or thick materials are often sold diluted. What matters is the carrier and the percentage. The 2021 study above found propylene glycol, dipropylene glycol, triethyl citrate and vegetable oil as diluents in products sold as essential oils.
- Vegetable oil carriers are fats and will blend into wax. Less of what you weigh out is aromatic material.
- Alcohol carriers do not belong in a wax pot. Ethanol has a flash point of about 55°F (13°C), below room temperature.
- Glycols and other synthetic solvents are outside what we use. If a supplier will not name the carrier, choose another product.
Using essential oils in candles
How much to use
How much essential oil a candle can take depends on the wax and on the type of candle. Every wax has a limit to the scent it can hold, so start from the figure for your wax and test below it. The step by step method covers the weighing.
A container candle scents a room from its melt pool, the layer of liquid wax around the wick. That pool is what gives off the scent of essential oils and plant extracts, which is why container candles are where they work best.
Flash point and when to add the oil
Flash point is the lowest temperature at which a liquid gives off enough vapor to form an ignitable mixture with air. It is listed in Section 9 of a safety data sheet. Limonene, the main component of citrus oils, has a flash point of about 113 to 119°F (45 to 48°C). Linalool, a main component of lavender oil, is about 160 to 172°F (71 to 78°C).
Makers often repeat a rule that oil must be added below its flash point or the scent will burn off. We found nothing authoritative behind that rule. Flash point is a fire property. It describes when vapor can be ignited by a flame or spark, and it is not a temperature at which the oil is destroyed.
What costs you scent is evaporation, which rises with temperature, time and exposed surface. So add essential oils at the lowest temperature at which the wax is fully liquid and the oil stirs in evenly, stir gently until blended, and pour without leaving the pot on the heat. Flash point matters for fire. Melted wax can be hotter than the flash point of a citrus oil, so add oils away from open flames and other ignition sources.
Volatility and scent throw
Perfumers sort materials by how quickly they evaporate. In a review of perfume engineering, top notes such as citrus are the first impression and fade within minutes on skin, middle notes such as florals and spices last a few hours, and base notes last longer. The property underneath is vapor pressure. At room temperature limonene, the main component of citrus oils, has roughly ten times the vapor pressure of linalool, a main component of lavender oil.
The same ordering shows up in candles.
- Citrus oils are the most volatile. Sweet orange oil is around 95 percent limonene. These oils smell strong in the bottle, but much of that scent is lost during pouring, curing and storage, so in a finished candle they tend not to throw as far.
- Resinous oils hold on. Oils and extracts from resins, woods and roots are made of heavier compounds that evaporate slowly. They tend to throw further and to last through the life of the candle.
- Blends balance the two. Pairing a light oil with a heavier one helps the candle keep its character from the first burn to the last.
Judge throw by test, unlit and then burning.
Curing
Makers commonly rest a poured candle for days to two weeks before judging its scent. We have no authoritative source for a specific cure time with essential oils. Pick a cure time and hold it constant across every test.
Cost
Essential oils cost more than manufactured blends, and prices vary widely between plants. One research group cites true lavender oil at more than six times the price of lavandin, its hybrid relative. That gap is the motive for adulteration, so a price far below the market for a costly oil is a warning sign. The 2021 study of online oils found price was not a clear predictor of quality.
Storage
Essential oils change with age. A review of essential oil stability identifies temperature, light and oxygen as the main causes. Store oils cool and dark in tightly closed bottles, keep the air space small, and date each bottle when you open it.
Testing
- Solubility. Stir the oil into a small amount of melted wax at your working load. Look for cloudiness, droplets or sediment, then let it set and check the surface for beads of oil.
- One change at a time. Keep the wax, vessel and wick the same while you compare oils or loads.
- Burn. Confirm the wick with each new blend and load. The full pouring method is in how to make a coconut wax candle.
- Records. Write down the batch number of every oil, so a result can be traced to its report.
Why we scent with essential oils
With a tested oil from a named plant you know what you put in the candle, and you can tell your customers. For us, non-toxic means nothing synthetic and nothing derived from petroleum, and a tested essential oil is how a maker can show that for the scent. Natural waxes to pair with it are in our wax collection.