How to Harden Coconut Wax (and Raise Its Melt Point)

Blocks of pale yellow beeswax

Coconut wax pours smooth, clings to glass and carries scent well. It is also one of the softest candle waxes sold, which becomes a problem in a hot car, a summer market stall or a delivery truck. This guide covers why it is soft, the additives makers use to firm it up, starting percentages for each, and how to test a blend before you commit to it.

Why coconut wax is soft

Coconut wax is hydrogenated coconut oil, usually blended with other plant waxes. Coconut oil is built largely from medium chain fatty acids. Lauric acid alone makes up roughly 45 to 53 percent of it, and shorter chains melt at lower temperatures than the longer chains that dominate soy or palm.

The numbers on wax data sheets show the gap. A straight coconut candle wax can have a drop point of 96 to 100°F (36 to 38°C). Soy container waxes run from 110 to 130°F (43 to 54°C).

Most coconut candle waxes are sold as blends for this reason. Our Creamy Coconut Wax (CCN1 by Calwax) is a coconut based blend with a melting point of 108 to 115°F (42 to 46°C). That works for container candles in a temperate room. In a warm tropical environment you may need a hardener to raise the melting point. There is more on the base material in what is coconut wax.

What "harder" means in a candle

Two things change when you add a higher melting wax. The blend softens at a higher temperature, so a finished candle holds its shape longer in heat. The blend also needs more heat to form a melt pool, so the wick that worked before may now be too small.

Scent pulls the other way. Essential oils are liquids, and liquid oil blended into a soft wax tends to make the finished candle softer. If heat tolerance is the goal, a lower scent load is the first adjustment to test, before any additive. Choosing oils is covered in how to choose essential oils for candles.

The options

Beeswax

Beeswax melts at 62 to 65°C (about 144 to 149°F), well above any coconut blend, and it mixes readily with vegetable waxes.

The right amount depends on the base wax. With our softer CCN1, we have found that adding 1 1/2 ounces of beeswax per pound of wax raises the melt point and makes a high quality candle. That is about 9 percent of the wax weight.

Beeswax is an animal product, so it will not suit a candle sold as vegan. It can also add a faint honey note and a cream color, depending on the grade.

Rice bran wax

Rice bran wax is a hard plant wax recovered when rice bran oil is winterized. It melts at 77 to 82°C (171 to 180°F) and adds hardness and strength to a blend. That is higher than beeswax, and it keeps a blend entirely plant based.

There is no standard starting percentage for rice bran wax in coconut container candles. Because it melts higher than beeswax, begin below the beeswax amount above and step up in small increments. It needs more heat to melt fully, so bring the blend up to the rice bran wax's melting range and stir until no solids remain.

We carry it in two forms, Premium Rice Bran Wax in chunks and Rice Bran Wax Pastilles, which are easier to weigh in small amounts. See what is rice bran wax for more on the material.

Stearic acid

Stearic acid is a fatty acid long used as a candle hardener. It helps candles keep their shape in warm weather, and the usual starting rate is 5 percent (1 ounce per pound). It melts at about 150°F (66°C).

For CCN1 in warm tropical conditions, we suggest adding 15 percent palm stearic acid. That is a much higher rate than the usual starting figure, which was not written for coconut wax. The difference reflects how soft the starting wax is. If you are new to the additive, test at more than one level.

Check the source before you buy. Stearic acid is made from either animal tallow or vegetable oil, so a plant based candle needs a grade sold as vegetable or palm derived.

Blending with soy or another harder wax

The other route is to blend coconut wax with a harder base wax. Firmer soy waxes have drop points of 121 to 125°F (49 to 52°C) and 130 to 135°F (54 to 57°C), and plant waxes combine readily with one another.

Blending in a harder soy wax takes larger proportions than an additive, and it changes more than hardness. Soy brings its own traits, including a tendency to frost. There is no standard coconut to soy ratio, so treat any figure you see as a starting point for your own tests.

How to test a blend

Every change to a wax blend changes how it burns, so each version needs its own test. A basic method follows.

  1. Make small batches. Pour a control with no hardener and two or three versions at different percentages. Weigh everything and label each jar.
  2. Change one thing at a time. Keep the jar, wick, essential oils and scent load the same across the set.
  3. Let them cure. There is no established cure time for coconut wax scented with essential oils. Pick a rest period, treat it as a starting point, and hold it constant across the set.
  4. Burn test. Trim the wick to 1/4 inch (6 mm), burn in four hour cycles and look for a melt pool that reaches within 1/4 inch of the glass after three to four hours. A harder blend that leaves a ring of unmelted wax after several cycles likely needs a larger wick. The full method is in how to choose a candle wick for natural wax.
  5. Heat test. To check heat tolerance, hold finished candles in a warm oven at a known temperature, then see which ones keep their shape.

The full pouring process is in how to make a coconut wax candle.

Hot climate shipping and storage

A wax that begins to melt at 108°F (42°C) will soften in conditions that are common in summer transit. A hardened blend raises that margin. It does not remove the risk.

  • Keep the scent load modest in candles meant for summer shipping, since more liquid oil tends to make a soft wax softer.
  • Store and ship candles upright, which matters most with soft coconut blends.
  • Store raw wax and finished candles in a cool place out of direct sun.
  • Expect cosmetic changes after a heat cycle. In high temperatures, soft coconut wax can sweat, which shows as beads of oil on the surface.

If you sell into hot regions year round, it may be simpler to formulate one harder blend for every season than to manage two recipes. Other base waxes are listed in our wax collection.