Rice bran wax is a hard, high melting plant wax recovered when rice bran oil is refined. Candle makers use it mainly as a hardener for soft waxes and as a plant-based stand-in for beeswax or carnauba.
Where rice bran wax comes from
Rice bran is the brown outer layer removed when rice is milled. Pressing or extracting the bran yields rice bran oil, and that crude oil carries a small amount of natural wax.
The wax is removed by winterizing (also called de-waxing). The oil is chilled until the wax crystallizes, and the solid wax is filtered out and refined. The US Food and Drug Administration's food additive rule describes it in the same terms, as wax taken from rice bran and then refined.
Its INCI name is Oryza Sativa (Rice) Bran Wax. It is sold as chunks or pastilles, in colors from off white through yellow to light brown, and it has very little odor.
What it is chemically
Rice bran wax is made up almost entirely of wax esters. These are long chain fatty acids bonded to long chain fatty alcohols. The fatty acids run to about 16 to 32 carbons and the fatty alcohols to about 24 to 38 carbons.
Those long, straight, saturated chains pack tightly, which is why the wax is hard and melts at a high temperature. Published analyses differ on the exact chain lengths.
Melt point
Rice bran wax melts far above ordinary candle waxes. Published ranges overlap but do not match exactly.
- The FDA specification for food use sets 75 to 80°C (167 to 176°F).
- Refined cosmetic grades are commonly listed at 77 to 82°C (171 to 180°F).
- Our premium rice bran wax chunks are listed at 167 to 185°F (75 to 85°C), and our rice bran wax pastilles at about 171 to 180°F (77 to 82°C).
For scale, beeswax melts at about 144 to 149°F (62 to 65°C), and container soy and coconut waxes melt between roughly 108 and 131°F (42 and 55°C).
Why candle makers use it as a hardener
Soft waxes such as coconut and container soy slump and sweat in heat. Blending in a harder, higher melting wax raises the temperature at which the candle softens. Rice bran wax does this at low percentages because of how it crystallizes.
A peer-reviewed study in the Journal of the American Oil Chemists' Society found that 1 percent rice bran wax was enough to gel olive oil at 68°F (20°C). Carnauba needed 4 percent and candelilla 2 percent. The authors attribute this to long, needle-shaped crystals that spread through the oil and hold it in place.
That is a lab result in liquid oil, so it does not translate directly to a scented candle.
How much to use
We have not found a wax manufacturer's data sheet that publishes a recommended percentage for adding rice bran wax to coconut or soy container wax. The published numbers come from patents, and they describe two quite different kinds of candle.
Small additions to oils and soft bases
One patent covers candles made of 3 to 15 percent rice bran wax in 85 to 97 percent vegetable oil. Its examples include 6 and 10 percent in canola oil and 13 percent in sunflower oil for tealights. In its tealight comparison, the rice bran wax candle had a smooth surface that was free of oil, while the carnauba version sweated.
Rice bran wax as the main ingredient
A second patent takes the opposite approach and softens rice bran wax with coconut oil. It claims blends of 60 to 80 percent rice bran wax with 20 to 40 percent coconut oil. It prefers 80/20 or 70/30 for tapers and 70/30 or 60/40 for pillars.
The same patent explains why the wax is not used alone. By itself rice bran wax is brittle, it burns with only a small melt pool, and pound for pound it is pricier than the common candle waxes.
Putting that to work
Patents describe what an inventor claims, and none of this replaces testing in your own vessel. For hardening a coconut container wax, a sensible approach is a small test series (for example 2, 5 and 10 percent rice bran wax by weight) poured alongside an unmodified control, then compared for firmness, surface and burn.
For reference, the hardeners with published guidance for coconut wax are beeswax and stearic acid. With our CCN1 coconut wax, that guidance is about 9 percent beeswax or 15 percent palm stearic acid. Rice bran wax melts at least 18°F (10°C) higher than beeswax, so there is no reason to assume the same percentages apply.
Our guide to hardening coconut wax covers the method step by step.
Working with it
- Melt it fully first. Rice bran wax stays solid at the 150°F (66°C) or so used for container waxes. Melt it on its own or bring the whole blend above the rice bran wax's melt point, stir until clear, then cool to your normal working and pour temperatures.
- Add scent late. A blend with rice bran wax is heated well above the usual container wax range, so let it cool back toward your normal working temperature before you stir in essential oils. Check each oil's flash point on its safety data sheet first. More in how to choose essential oils for candles.
- Retest the wick. A higher melting blend tends to form a smaller melt pool with the same wick, so confirm your wick size with burn tests.
- Pick the form that suits your batch size. Pastilles are easier to weigh out in small amounts. Chunks suit larger melts.
Waxes that melt above about 88°C (190°F) tend to burn poorly in a candle. Rice bran wax sits just under that line.
A beeswax or carnauba alternative
Makers of vegan candles use rice bran wax where a formula would otherwise call for beeswax, since it is plant derived and nearly odorless. It is harder and higher melting than beeswax and lacks beeswax's plasticity, so a one-for-one swap changes the result. Start with less.
It is closer in character to carnauba, another hard plant wax. The candle patent above reports that carnauba and candelilla did not hold liquid oil as well as rice bran wax in its tests. In coatings, modified rice bran waxes are sold as replacements for carnauba.
Cosmetic and food uses, in brief
Rice bran wax is also used well outside candle making. In cosmetics it is listed as a skin conditioning ingredient, and formulators use it to give structure to lipsticks, lip balms and mascaras. The Cosmetic Ingredient Review panel assessed rice-derived ingredients, including rice bran wax, in a 2006 report and accepted their use in cosmetics as then practiced.
In food, FDA rules permit it as a coating on candy and fresh produce at up to 50 parts per million and in chewing gum at up to 2.5 percent.
Those approvals cover skin contact and eating. They say nothing about what the wax emits when burned, and we have not found published emissions testing for rice bran wax candles. If you are making cosmetics, confirm with your supplier that the specific lot is cosmetic grade.
Summary
Rice bran wax is a hard ester wax from rice bran oil refining that melts at about 167 to 185°F (75 to 85°C). In candles it earns its place as a blending wax that firms up coconut and other soft bases at low percentages. Published usage figures are thin, so plan on your own test batches.
For a side by side look at the main candle waxes, see candle wax types compared, or browse the full wax collection.